Improving workplace health & safety through collaboration

Articles Electrical Safety - Home Wiring Basics

Electrical Safety - Home Wiring Basics

Principal Author / Publisher:Safetyhow Admin
Article Rating:
Body
Home wiring is not something you should try yourself without adequate knowledge. The purpose of this article on electrical home wiring basics is only to revise your fundamentals. It should not be viewed as a guide.


Wiring forms an integral component of home infrastructure. It is also a task that has to be executed with utmost care and caution. As far as possible, try to get a professional for doing this job, since it can be a matter of life and death for you and your family. Every year, there are millions of casualties due to poor electrical repair jobs. Hence, you cannot afford to experiment or fool around. Remember that this is not a DIY (do-it-yourself) project. Hence, please do not attempt to do it yourself, unless you have requisite amount of knowledge. If you still think you can do it, then read the tips only as a reference.


Points to Remember

Cut the Power Supply

  • This is the most important of all tips. No matter if you are changing the wiring of entire house or only adding a new connection, you always need to cut the power supply of your work area.
  • Even the smallest of repair work should be done with the power supply disconnected.
Follow the Electrical Code

  • Every locality has its own set of electrical codes, which every homeowner is expected to follow.
  • Hence, before you take up any electrical job, thoroughly understand the electrical codes and regulations in your locality.
  • The main aim here is to protect the homeowners in the respective locality.
  • These codes should not be perceived as a hurdle; instead consult your local inspector to get the job rightly done.
     
Know the Structural Components

  • The first component is the service entry. This is the point from where you receive your personal connection from the main grid.
  • The path of the wire that brings electricity to your house from the main grid should always be kept clear.
  • There should not be tree limbs or any other obstructions in between.
  • These wires should pass at least 10 feet above the ground level, and they should not be accessible from any windows, balconies, or terrace.
  • Panel board is another component. This is the point from where you can inspect for faults in the system.
  • Branch circuits are the areas from where the panel board directs the flow of electricity.
  • Understanding the working of branch circuits is of utmost significance.
General Tips

  • These basics involve the switchboards and fixtures of lights and other appliances.
  • Home wiring is often completed as and when the plumbing completes.
  • However, sometimes, rewiring may become necessary to fit additional fixtures or if remodeling of the house is on the cards.
  • Each fixture and switch is connected to the main switch by means of three wires: hot, neutral, and ground.
  • Hot wire is the black wire which carries the current from the house to the appliance.
  • The neutral wire that is brown in color is used to flow the current back to its place of origin.
  • Ground wire is a bare copper wire, which is used to transfer the current to the ground (in case the hot wire fails to deliver the current to its desired destination).
     
Just knowing the basics is not sufficient to wire the house without any faults and defects. You should take proper guidance from a professional in order to avoid any possible hazards. Also, after completing your work, get it tested from a professional to ensure proper safety.


 
  • thc7289962559335d5858245deb12f6722.jpg

References
Article Rating

This article has been read 1164 times.

DISCLAIMER: All contents published on this website is for informational purposes only. In as much as we encourage write-ups to be originally written by the claimed authors, we might not be able to control those who will try to copy articles from other authors/writers. In view of the above, the owner and management of Safetyhow.com will not be liable for any loses, injuries, or damages from the display or use of the contents herein. Likewise, the owner and management will not be liable for any errors or omissions in the information stated. Furthermore, we highly recommend that any form of plagiarism or libel committed as a result or implication of the articles written by any specific author in this platform be reported to us immediately so that appropriate action will be given.

BROWSE ARTICLE BY CATEGORY

BROWSE ARTICLE BY INDUSTRY