Improving workplace health & safety through collaboration

Articles Powder Actuated Tool Safety Tips

Powder Actuated Tool Safety Tips

Principal Author / Publisher:Safetyhow Admin
Article Rating:
Body
Powder actuated tools are often nail guns or other types of hand tools that get there power from a tiny explosive charge that forces the nail out of the gun at a high speed. Powder actuated tools are made to force nails into materials such as concrete and steel which a normal nail and hammer could never get through. Since the force required for this task is extremely high this types of tools can be deadly if used incorrectly. Following powder actuated tool safety tip will help you remain safe at work.

Tips For Powder Actuated Tools Safety

  • Never ever under any circumstances point a powder actuated tool at another person. Even if the tool is not on. There have been cases of accident misfires that have caused serious injuries.
  • You should only use this tools once you have been trained to work them properly.
  • When the nail gun is not in use it should not be loaded
  • Never put your hand on the area near the muzzle or on the muzzle of the tool. If you move or misfire the nail could injury your hand.
  • Always wear protective safety goggles or a face shield. The goggles will protect only your eyes while the mask will cover your entire face. The choice is yours to make but I feel safer with the full face mask.
  • Keep your PAT clean at all times and have it maintained annually to insure it is working correctly.
  • Do not use in areas near flammable since they sometimes spark and this could cause an explosion.
  • Check the surface area before you begin working. Make sure there are no nails already in the area and that the new nails will be able to go through.


This are just a few powder actuated safety tips. You should train all employees to use PAT’s correctly and safely. Proper training and teaching is the only way to prevent injuries and fatalities in the workplace. It is every persons job to use their head and think safety at work.
  • ay7b8b7e0223c148ee3d18086f9c1b36ac.jpg

Videos



References
Article Rating

This article has been read 1137 times.

DISCLAIMER: All contents published on this website is for informational purposes only. In as much as we encourage write-ups to be originally written by the claimed authors, we might not be able to control those who will try to copy articles from other authors/writers. In view of the above, the owner and management of Safetyhow.com will not be liable for any loses, injuries, or damages from the display or use of the contents herein. Likewise, the owner and management will not be liable for any errors or omissions in the information stated. Furthermore, we highly recommend that any form of plagiarism or libel committed as a result or implication of the articles written by any specific author in this platform be reported to us immediately so that appropriate action will be given.

BROWSE ARTICLE BY CATEGORY

BROWSE ARTICLE BY INDUSTRY