Improving workplace health & safety through collaboration

Articles Personal Protective Equipment - Hand And Arm Protection

Personal Protective Equipment - Hand And Arm Protection

Principal Author / Publisher:Safetyhow Admin
Article Rating:
Body
When a workplace hazard assessment shows that employees may encounter injury to hands and arms that cannot be eliminated through engineering and work practice controls, supervisors must require that the employees wear appropriate protection. Potential hazards include skin absorption of harmful substances, chemical or thermal burns, electrical dangers, bruises, abrasions, cuts, punctures, fractures and amputations. Protective equipment includes gloves, finger guards and arm coverings or elbow-length gloves. See the hazard assessments section on our Personal Protective Equipment (PPE) webpage for information about conducting a hazard assessment. Campus management and supervisors should explore all possible engineering and work practice controls to eliminate hazards and use PPE to provide additional protection against hazards that cannot be completely eliminated through other means.


Types of Protective Gloves
With a wide variety of hazards and resultant injuries that can occur, selecting the right glove can be a challenge. Both the hazard and the activity affect glove selection. Some of the needs that can inform the glove selection process include:

What needs protection?
  • hand only
  • forearm
  • arm


What are the grip and dexterity needs?
  • Is the work in dry, wet, or oily conditions?
  • Is fine dexterity needed?
  • Is chemical protection needed?
  • Type of chemicals handled.
  • Nature of contact (total immersion, splash, etc.).
  • Duration of contact.


Is other protection necessary?

  • Thermal
  • Electrical
  • Vibration
  • Cuts and punctures
  • Wear and abrasion resistance
  • What are the size and comfort requirements?


It is important for employees to use gloves specifically designed for the hazards and activities found on their job. Gloves designed for one activity/hazard may not adequately protect during a different activity/hazard. Fortunately, there are many types of gloves that protect against a variety of hazards. Generally, gloves fall into four categories: Leather, canvas or metal mesh gloves

  • Fabric and coated fabric gloves;
  • Chemical- and liquid-resistant gloves;
  • Insulating rubber gloves.
  • Areas and personnel affected


Anyone exposed to a workplace hazard that could injure the hand or arms need to be protected from that hazard. Areas and personnel most likely to need hand/arm protection include:

  • Laboratories and laboratory personnel (staff and students)
  • Certain art studios and workshops (staff and students)
  • Physical plant/facilities staff
  • Auxiliaries staff
  • Custodial staff
  • Laboratories


There are many resources for laboratory staff to take advantage of when selecting PPE for the hands. Some of these are listed below: UW Milwaukee – Their webpage has a brief overview and links to glove compatibility charts and several topical articles. Northwestern University — Allergic Reactions to Glove Materials, a web page that describes both irritant contact dermatitis and immune reactions by some users to certain gloves.
Employees must receive information and training that enable them to be apprised of the hazards present in their work, and to understand the correct use of personal protective equipment. Laboratory employees generally need to be trained through their chemical hygiene plan, which should at least meet the requirements of 29 CFR 1910.1450(f), or requirements of 29 CFR 1910.132(f). For all other employees, the minimal training requirements to be met appear at 29 CFR 1910.132(f). Regulations, interpretations and standards
OSHA
29 CFR 1910.138 – Hand Protection
29 CFR 1910.132 – General requirements – Includes the hazard assessment and training requirements.
  • 8e88e448d272a3c9ca49f7e7fad66c2be0.jpg
  • t4042f5ff5860148136d13e9950724ed25.jpg

Videos



References
Categories
Keywords
Article Rating

This article has been read 1142 times.

DISCLAIMER: All contents published on this website is for informational purposes only. In as much as we encourage write-ups to be originally written by the claimed authors, we might not be able to control those who will try to copy articles from other authors/writers. In view of the above, the owner and management of Safetyhow.com will not be liable for any loses, injuries, or damages from the display or use of the contents herein. Likewise, the owner and management will not be liable for any errors or omissions in the information stated. Furthermore, we highly recommend that any form of plagiarism or libel committed as a result or implication of the articles written by any specific author in this platform be reported to us immediately so that appropriate action will be given.

BROWSE ARTICLE BY CATEGORY

BROWSE ARTICLE BY INDUSTRY