Improving workplace health & safety through collaboration

Articles Personal Protective Equipment Eye Safety

Personal Protective Equipment Eye Safety

Principal Author / Publisher:Safetyhow Admin
Article Rating:
Body
Have Your Workers "Seen the Light" About Eye Safety?

Thousands of people are blinded each year from work-related eye injuries that could have been prevented with the proper selection and use of eye and face protection

The main causes of eye injury are flying objects, contact with chemicals, improper equipment operation, poor choice of eyewear, improper fit, and lack of awareness about risks.

Examples of Eye Hazards

Depending on your workplace and the kind of tasks employees perform, eye hazards will vary, of course. But these are the usual suspects:

  • Impact from flying objects such as large chips, fragments, particles, sand, and dirt from tasks such as chipping, grinding, machining, masonry work, wood working, sawing, drilling, chiseling, powered fastening, riveting, and sanding.
  • Chemicals in the form of splashes, fumes, vapors, and irritating mists from tasks such as acid and chemical handling, degreasing, plating, and so forth.
  • Harmful dust getting in the eyes from tasks such as woodworking, buffing, and general dusty conditions.
  • Radiant energy, glare, and intense light from tasks such as welding, torch-cutting, brazing, soldering, and laser work.
  • Heat from anything emitting extreme heat from tasks such as furnace operations, pouring, casting, hot dipping, and welding.
  • Blood and infectious material splashes that could allow blood borne pathogens to enter the body through the eyes. 
Protecting Eyes

Recommendations:

  • Provide the highest-quality eye protection, such as that found in polycarbonate lenses.
  • Make sure protective eyewear can be customized and is adjustable. Gear that cannot be fit to an employee's face is more likely to be removed than gear that fits well.
  • Inspect goggles periodically for cracks, breaks, and loose frames. Train employees to regularly look for and report these problems.
  • Regularly assess to determine if current eye protection measures are adequate, especially when new procedures or materials are introduced.


Additionally, employees should be trained to recognize eye hazards, select the proper protection for different kinds of hazards, and care for protective eyewear properly.

Need to protect against the greatest possible hazard level

Proper fit for protective eyewear

Combining protective eyewear with prescription lenses

Inspecting eye protection

Cleaning and maintenance of eyewear

First aid for eye injuries

Content kindly provided by Moolmans
 

 
  • 40e544af78771540b3045980e61be50681.jpg

References
Article Rating

This article has been read 957 times.

DISCLAIMER: All contents published on this website is for informational purposes only. In as much as we encourage write-ups to be originally written by the claimed authors, we might not be able to control those who will try to copy articles from other authors/writers. In view of the above, the owner and management of Safetyhow.com will not be liable for any loses, injuries, or damages from the display or use of the contents herein. Likewise, the owner and management will not be liable for any errors or omissions in the information stated. Furthermore, we highly recommend that any form of plagiarism or libel committed as a result or implication of the articles written by any specific author in this platform be reported to us immediately so that appropriate action will be given.

BROWSE ARTICLE BY CATEGORY

BROWSE ARTICLE BY INDUSTRY