Improving workplace health & safety through collaboration
Body
Forklifts are used in both small and large warehouse and yard operations. Many small operations like garden centers, nurseries, hardware stores and other businesses can benefit from owning a forklift. These machines can be a great asset to your business, but it is important to understand the safe operation of a forklift to safeguard your employees and your property.
Instructions
1.There are several types of forklifts. For inside warehouses and stores, the preferred forklift is either a propane or electric model, these do not give off potentially deadly carbon dioxide. For well-ventilated areas and outside yards, either a diesel- or gasoline-powered forklift is generally used.
2.Before operations, the operator should inspect the forklift for any obvious damage; look for flat tires, a damaged or missing seat belt, missing or damaged control knobs, broken or damaged mirror, fluid leaks and any obstructions in the lifting mechanism. Also, the operator should open the engine compartment and check any fluids for proper levels and check the fuel gauge for at least a quarter tank of fuel. If you find any defects they should be noted and a mechanic look at the forklift before operating.
3.All forklifts have an ignition switch, hand brake, foot brake, steering wheel, fuel or charging gauge, forward, reverse and neutral drive switch, a seat belt, accelerating pedal, and control knobs for raising, lowering and tilting the lifting forks. There may also be a control knob for shifty the lifting forks left or right. Additionally, there may be headlights, reverse lights, a mirror, backup alarm and other safety devices. Many models require that the hand brake be engaged, the drive switch be in neutral, the seat belt be fastened and the seat be depressed for the forklift to start. Some models will stop the engine automatically if the seat belt is unfastened and/or the operator gets out of the seat. These safety measures ensure that the vehicle does not drive unattended.
4.Once you have read the manual and completed the pre-operation checks it is time to mount your forklift. Use three points of contact when climbing in and out of your forklift this will prevent falls. Adjust the seat so it is a comfortable distance from the steering wheel. Make certain you put on your seat belt. Now ensure the hand brake is fully engaged, your foot is on the foot brake and the drive shift lever is in neutral. Now you can turn on the ignition. Once your forklift starts listen to the engine. Does it sound smooth and like it is running normally? If so, continue. Make a habit of always checking the fuel or charging gauge every time you start the engine. Now check the lever that raises and lowers the forks. Raise them smoothly and lower them to about a foot from the floor. This is the height they should be when driving. Try the tilt control knob. Make sure all movements are smooth, if not you may have hydraulic problems. Now check the horn. With your foot still on the foot brake, release the hand brake, push the driving switch to forward and let the forklift move forward. Stop. Put the driving switch in reverse, turn around in your seat and slowly back a few feet. If everything is okay, you are now ready to begin operation of your forklift.
5.Initial driving should be done in an open area like a parking lot or empty warehouse. The driver should drive slowly, careful not to drive faster than a fast walk. When backing, the driver should turn around in his seat and back slowly. It is recommended that the forklift horn be sounded when backing if no back up alarm is automatic on the forklift. The lifting forks should be approximately one foot from the ground when driving. The forks are kept low so that if a person is accidentally hit with the forks it may cause a broken bone, but not be fatal like striking someone in the spine or main body. Be cautious and stay aware of all your surroundings. Practice will improve your driving. The back of the forklift is very heavy Because of the way forklifts are built the forklift can turn suddenly. The weight of the forklift can cause a lot of damage to personnel, materials or facilities. Care in driving is a must. No horseplay, riders on the side or forks should not be tolerated. Drive slowly. Turn around and watch when backing. Get to know the forklift so you can judge distances. When you carry loads too high to see over, back the load so you can see where you are going. With heavy loads, back down ramps, this gives you more control. Wear your seat belt. If you drive off a dock or ramp and you are not wearing your seat belt it may be fatal. Be careful and take your time. Practice, patience and following safety makes for good forklift drivers.
6.Most forklift loads will be moved on wooden or plastic pallets. The lifting forks are adjustable. Practice picking up and moving empty pallets first. If you have to move objects on to racks or in tight places, it helps to have a two man rule to help you see past the masts of the forklift. Practice driving in tight places with an empty pallet. When you feel comfortable do the same with a loaded pallet or crate. Be careful when placing objects and learn to judge distances. Putting objects to close can cause damage during placement. Be aware of the weight limitations of your forklift. Do not lift objects that exceed the weight limits in your operators manual. If driving on docks, be careful of your backing up distances so you do not drive off the dock. Never drive in a vehicle from a loading dock unless the truck is chocked, has the brake on and there are spanning plates between the loading dock and the truck. When in doubt drive slow or stop and do what is the safest way to proceed.
7.When raising or lowering loads with the lifting forks, the forklift should be brought close to the truck, rack or stack then the forks lifted. The forklift should not move long distances or turn with a load raised. Movement with loads elevated can cause the forklift to tip over causing injury or death. This can also cause damage to the forklift, materials and facilities. The goal is the safe movement of materials without damage or injuries.
8.When operations are finished, the forklift should be parked on a flat, hard surface. The forks should be lowered to ground level and placed flat on the ground. This prevents trip injuries and injuries resulting from individuals getting injured on the front of the forks. The parking brake should always be engaged with the engine turned off and the key removed. Three points of contact should be used when dismounting from the forklift.
Instructions
1.There are several types of forklifts. For inside warehouses and stores, the preferred forklift is either a propane or electric model, these do not give off potentially deadly carbon dioxide. For well-ventilated areas and outside yards, either a diesel- or gasoline-powered forklift is generally used.
2.Before operations, the operator should inspect the forklift for any obvious damage; look for flat tires, a damaged or missing seat belt, missing or damaged control knobs, broken or damaged mirror, fluid leaks and any obstructions in the lifting mechanism. Also, the operator should open the engine compartment and check any fluids for proper levels and check the fuel gauge for at least a quarter tank of fuel. If you find any defects they should be noted and a mechanic look at the forklift before operating.
3.All forklifts have an ignition switch, hand brake, foot brake, steering wheel, fuel or charging gauge, forward, reverse and neutral drive switch, a seat belt, accelerating pedal, and control knobs for raising, lowering and tilting the lifting forks. There may also be a control knob for shifty the lifting forks left or right. Additionally, there may be headlights, reverse lights, a mirror, backup alarm and other safety devices. Many models require that the hand brake be engaged, the drive switch be in neutral, the seat belt be fastened and the seat be depressed for the forklift to start. Some models will stop the engine automatically if the seat belt is unfastened and/or the operator gets out of the seat. These safety measures ensure that the vehicle does not drive unattended.
4.Once you have read the manual and completed the pre-operation checks it is time to mount your forklift. Use three points of contact when climbing in and out of your forklift this will prevent falls. Adjust the seat so it is a comfortable distance from the steering wheel. Make certain you put on your seat belt. Now ensure the hand brake is fully engaged, your foot is on the foot brake and the drive shift lever is in neutral. Now you can turn on the ignition. Once your forklift starts listen to the engine. Does it sound smooth and like it is running normally? If so, continue. Make a habit of always checking the fuel or charging gauge every time you start the engine. Now check the lever that raises and lowers the forks. Raise them smoothly and lower them to about a foot from the floor. This is the height they should be when driving. Try the tilt control knob. Make sure all movements are smooth, if not you may have hydraulic problems. Now check the horn. With your foot still on the foot brake, release the hand brake, push the driving switch to forward and let the forklift move forward. Stop. Put the driving switch in reverse, turn around in your seat and slowly back a few feet. If everything is okay, you are now ready to begin operation of your forklift.
5.Initial driving should be done in an open area like a parking lot or empty warehouse. The driver should drive slowly, careful not to drive faster than a fast walk. When backing, the driver should turn around in his seat and back slowly. It is recommended that the forklift horn be sounded when backing if no back up alarm is automatic on the forklift. The lifting forks should be approximately one foot from the ground when driving. The forks are kept low so that if a person is accidentally hit with the forks it may cause a broken bone, but not be fatal like striking someone in the spine or main body. Be cautious and stay aware of all your surroundings. Practice will improve your driving. The back of the forklift is very heavy Because of the way forklifts are built the forklift can turn suddenly. The weight of the forklift can cause a lot of damage to personnel, materials or facilities. Care in driving is a must. No horseplay, riders on the side or forks should not be tolerated. Drive slowly. Turn around and watch when backing. Get to know the forklift so you can judge distances. When you carry loads too high to see over, back the load so you can see where you are going. With heavy loads, back down ramps, this gives you more control. Wear your seat belt. If you drive off a dock or ramp and you are not wearing your seat belt it may be fatal. Be careful and take your time. Practice, patience and following safety makes for good forklift drivers.
6.Most forklift loads will be moved on wooden or plastic pallets. The lifting forks are adjustable. Practice picking up and moving empty pallets first. If you have to move objects on to racks or in tight places, it helps to have a two man rule to help you see past the masts of the forklift. Practice driving in tight places with an empty pallet. When you feel comfortable do the same with a loaded pallet or crate. Be careful when placing objects and learn to judge distances. Putting objects to close can cause damage during placement. Be aware of the weight limitations of your forklift. Do not lift objects that exceed the weight limits in your operators manual. If driving on docks, be careful of your backing up distances so you do not drive off the dock. Never drive in a vehicle from a loading dock unless the truck is chocked, has the brake on and there are spanning plates between the loading dock and the truck. When in doubt drive slow or stop and do what is the safest way to proceed.
7.When raising or lowering loads with the lifting forks, the forklift should be brought close to the truck, rack or stack then the forks lifted. The forklift should not move long distances or turn with a load raised. Movement with loads elevated can cause the forklift to tip over causing injury or death. This can also cause damage to the forklift, materials and facilities. The goal is the safe movement of materials without damage or injuries.
8.When operations are finished, the forklift should be parked on a flat, hard surface. The forks should be lowered to ground level and placed flat on the ground. This prevents trip injuries and injuries resulting from individuals getting injured on the front of the forks. The parking brake should always be engaged with the engine turned off and the key removed. Three points of contact should be used when dismounting from the forklift.
- u377edb4255ffa802ca4a020a5211e4ad0.jpg
References
http://www.ehow.com/how_4481892_safely-operate-for ... .html
http://img.ehowcdn.com/615x200/ds-photo/getty/arti ... S.jpg
http://img.ehowcdn.com/615x200/ds-photo/getty/arti ... S.jpg
Article Rating
This article has been read 867 times.
DISCLAIMER: All contents published on this website is for informational purposes only. In as much as we encourage write-ups to be originally written by the claimed authors, we might not be able to control those who will try to copy articles from other authors/writers. In view of the above, the owner and management of Safetyhow.com will not be liable for any loses, injuries, or damages from the display or use of the contents herein. Likewise, the owner and management will not be liable for any errors or omissions in the information stated. Furthermore, we highly recommend that any form of plagiarism or libel committed as a result or implication of the articles written by any specific author in this platform be reported to us immediately so that appropriate action will be given.