Improving workplace health & safety through collaboration

Articles Grinding Disc Safety

Grinding Disc Safety

Principal Author / Publisher:Safetyhow Admin
Article Rating:
Body
Grinding is an abrasive method of cutting materials. It uses a grinding disc, or wheel, to cut mechanically through different substances. Grinding wheels must be used by professionals who understand not only how the grinding process works, but also have a thorough knowledge of the inherent safety risks. Misuse of a grinding wheel can result in serious injuries.

Characteristics

There are five characteristics of a grinding wheel. The first is the material. The material must be abrasive to cut properly. Based on the hardness of the material being cut, the grinding wheel varies in its components. The main components of the material of the grinding wheel are aluminum oxide, silicon carbide, diamond, and cubic boron nitride. The second characteristic is the grain size. The larger the grain, the freer the cut will be. But if a smaller grain is used, a finer surface will be produced. The third component is wheel size, which ranges from soft to hard. The fourth is grain spacing. A less dense wheel will cut more freely. The final component is the wheel bond, which has an effect on the finished surface of what is being cut.

Types

The most common type of grinding wheel is the straight wheel. They are generally used for surface grinding. The cylindrical grinding wheel can be used to produce straight surfaces. The tapered wheel is used for grinding machinery parts such as gear teeth. The dish cup allows for grinding in small areas such as crevices. The diamond wheel is the most substantially strong wheel. It uses the diamond bits to cut through extremely hard materials such as other gem stones and concrete.



Use

Using a grinding wheel involves very close monitoring of safe practice. First, the grinding wheel must be clamped onto a grinding machine securely, so that it won't come loose during usage. To do this, first select the right type of grinding wheel and clamp it accordingly. The second step in preparing to use a grinding wheel is to dress it properly. Dressing entails removing the abrasives that may be stuck onto the grinding wheel from previous use. The final step is making sure the grinding wheel is parallel to the surface against it to ensure an accurate surface.

Preparation for Use

The wheel must be "sounded" before use. To sound a grinding wheel, suspend the wheel from a rope and tap it with an object such as a wooden stick. The wheel should make a sharp ring when hit. If the wheel is damaged, it will instead make a dull thud. The second step before using a grinding wheel is to check if the clamps are securely fastened so that the wheel will not come loose during use.

Injuries

The main injuries that pose a risk while using a grinding wheel include eye injuries, cuts and amputations, hearing loss and inhalation of toxic particles. Eye injuries occur when flying particles from the material the wheel is grinding fly into the person's face. To prevent this, always wear goggles while using a grinding wheel. Cuts and amputations occur when disintegrating parts of the grinding wheel come off the wheel and cut the person using it. To avoid this, the person using the grinding wheel must always make sure his wheel is up-to-date. Hearing loss can occur from the extremely loud noise a grinding wheel produces, so ear plugs should be worn during use. Inhalation of toxic chemicals can from toxic particles flying from either the grinding wheel or the material it is grinding. Persons using a grinding wheel should use a face mask while the grinding wheel is in use.

  • lhefd8a9f813a793febcc79b8d345a1347.jpg

References
Article Rating

This article has been read 1069 times.

DISCLAIMER: All contents published on this website is for informational purposes only. In as much as we encourage write-ups to be originally written by the claimed authors, we might not be able to control those who will try to copy articles from other authors/writers. In view of the above, the owner and management of Safetyhow.com will not be liable for any loses, injuries, or damages from the display or use of the contents herein. Likewise, the owner and management will not be liable for any errors or omissions in the information stated. Furthermore, we highly recommend that any form of plagiarism or libel committed as a result or implication of the articles written by any specific author in this platform be reported to us immediately so that appropriate action will be given.

BROWSE ARTICLE BY CATEGORY

BROWSE ARTICLE BY INDUSTRY