Improving workplace health & safety through collaboration

Articles Electrical Safety - Grounding Rod

Electrical Safety - Grounding Rod

Principal Author / Publisher:Safetyhow Admin
Article Rating:
Body
Grounding rod installation should be done carefully, taking the necessary precautions. Given below is the method to install a ground rod at home and the required safety measures that need to be taken.


As improper installation of a grounding rod can lead to severe problems, many people prefer getting an electrician to do the job, as he has the expertise and the right tools for it. A grounding rod is a device of an electrical system, that helps in carrying away the current from a faulty electrical circuit and route it safely to the ground. Although it is not required by law in all the countries of the world, it is advisable to install it as a safety measure. It can be purchased from stores like Home Depot at reasonable prices.


This rod is made of conductive materials, the best one being copper. An ideal and standard depth for it is 8 feet. When it is driven into the ground, it is connected to the electrical system with the help of a wire and a ground connector.





Installation Process

Things required for this process are a clamp, a shovel to dig, a hose with water, a wrench set, and a rubber mallet. Given below are the steps for this procedure.


  • Dig a small hole, about 12 inches wide and 12 inches deep, where you want the rod to be placed. While deciding on the location, ensure that it complies with the local building code.
  • Once the hole is dug, fill it with water using the hose pipe. Now place the rod and use the rubber mallet to strike it until it goes a few inches into the ground.
  • Pull it out of the hole and fill the hole with water again.
  • Now place the rod in the hole again, and using the rubber mallet, strike it to enter deeper into the ground.
  • Keep repeating this process until it reaches the required depth.
  • Once that is accomplished, strike the rod into the ground for the final time, but do not add water into the hole now. This is to ensure that it fits firmly into the ground.
  • Cover the hole with the dug out soil.
  • To finish, attach the top of the rod to the electrical ground lead using a clamp.
The placement location of the rod is very important. A long one can hit the water, gas, or sewage lines beneath the ground; it could damage the electrical, telephone, or cable lines. Even if you are certain of the location, it is advisable to speak to your local utilities and check if it is safe. If anything goes wrong in the process, you might have to bear a heavy price for repairs.


As we are dealing with electricity, its resistance needs to be monitored on a regular basis. The aim should be to maintain low resistance. There could be several reasons behind the increase in the resistance of the ground rod, and therefore, it is advisable to test it using a clamp-on tester.


 
  • vl5de865c60ff46b9c68cd3409740b55ed.jpg

References
Article Rating

This article has been read 1129 times.

DISCLAIMER: All contents published on this website is for informational purposes only. In as much as we encourage write-ups to be originally written by the claimed authors, we might not be able to control those who will try to copy articles from other authors/writers. In view of the above, the owner and management of Safetyhow.com will not be liable for any loses, injuries, or damages from the display or use of the contents herein. Likewise, the owner and management will not be liable for any errors or omissions in the information stated. Furthermore, we highly recommend that any form of plagiarism or libel committed as a result or implication of the articles written by any specific author in this platform be reported to us immediately so that appropriate action will be given.

BROWSE ARTICLE BY CATEGORY

BROWSE ARTICLE BY INDUSTRY