COMMON WELDING JOBSITE HAZARDS AND HOW TO AVOID THEM

Welding is the highest-risk occupation of any within the construction industry. OSHA study reports that 1 out of every 250 construction workers will die from a welding accident. That doesn’t account for other potential hazards that welders face daily, such as – electrical shock, burns, eye damage, cuts, exposure of chemicals. Although, most of these injuries or deaths can be prevented with enhanced construction site safety, proper training, engineering controls, and personal protective equipment (PPE).

The act of welding is a procedure of heating the surfaces of metal pieces or parts to join them together. Even though welding has over 70 different welding procedures, the top three types are –

• Submerged Arc Welding (SAW)
• Shielded Metal Arc Welding (SMAW)
• Gas Tungsten Arc Welding (GTAW)

Most Common Welding Hazards

Every type of welding produces risks and hazards, not only for the welder but also for other construction workers or people in the vicinity. By understanding the risk and precautions to help prevent accidents and injuries, it will make your project site safer.

FUMES AND GASES

Welding exposes the welder and other personnel to toxic fumes like carbon monoxide, aluminum, arsenic, nitrogen just to name a few. The damage caused by being exposed to welding fumes varies in degree depending on the specific gas or fume and how long the exposure lasted and range from an irritated throat or eyes to pneumonia, or cancer.

Recommended safety precautions –

• Use appropriate ventilation and exhaust
• Keep heat out of fume plume
• When ventilation is insufficient, use approved respiratory devices
• Keep contaminate levels monitored for safe air quality
• Take part in targeted safety training to understand the potential dangers

ELECTRICAL SHOCK

Electrocution is a serious potential hazard during arc welding because live electrical circuits are used to melt metals creating risk of electric shock by touching two metal objects with a voltage between them. The electrical shock may severely injure or be fatal to the welder. Even though arc welding is a high risk occupation, it is safe when proper precautions and safety measures are taken. Such as –

• Be sure all equipment is dry and in good working condition
• Proper insulation – such as rubber mats
• Welder wear good condition dry gloves
• Welding equipment routinely inspected for safety
• In humid work areas, take extra safety measures

FIRE

Since welding generates sparks that can be sprayed over 30 feet from the source, fire is a genuine concern. When an occurrence happens, other workers are at a high risk of getting burned, especially one with grease on their clothes or around flammable materials.

Fire prevention measures include –

• Keep all flammable chemicals, combustible substances and materials stored away from welding spaces
• Minimize any clutter or dust as a high concentration of fine particles can oxidize and may cause an explosion or fire without warning
• If flammable materials can’t be moved, use fire-resistant shields
• Always keep a fire extinguisher handy

Personal Protective Equipment (PPE)

When welders wear PPE, it drastically reduces the risk of physical hazards. Recommended PPE for welders are –

• Boots and gloves: Rubber-soled hard toe boots and insulated flame-resistant gloves help provide protection from electric shock and falling objects.
• Respirators: Reduce the gases and fumes the welder breaths in protecting lungs and respiratory systems.
• Welding helmets with side-shields: Helmets protect against UV rays that could cause blindness, plus debris and chemical burns.
• Fire resistant clothing: Provides protection against risks of burns caused by heat, fire and radiation.
• Ear protection: Protects the ears against loud noises and vibrations within the work environment.

CONCLUSION

One way to assure your construction site is as safe as possible is to use a professional construction management service. They can help educate workers by making them aware of all potential hazards and proper precautions to take to prevent work site accidents.